TOUCAN Camera
WIDE SPECTRAL RANGE (400-900nm)
Snapshot Multispectral Camera
400-900nm spectral range
10 spectral bands
4.2 Mpx raw resolution
10 bits
USB 3.0
THE UNIQUE VIS+NIR SNAPSHOT MULTISPECTRAL CAMERA ON THE MARKET
Very Compact Multispectral Cameras
The TOUCAN Multispectral camera is specially designed to allow high integration of VIS+NIR multispectral systems. This lightweight (less than 180g) and very small footprint (52x63x40mm) camera splits the image into 10 spectral bands on a very large range (400-900nm). Made by hybridization of a custom Bayer-like mosaic filter on a commercial 4.2 MPixel CMOS Sensor, it allows extracting the spectrum on each point of the image.
63 mm
40 mm
52 mm
180 g
Toucan 400-900 nm
Typical TOUCAN filter transmission spectrum
Specifications
Common
Array type
Optical Interface
Resolution (raw picture)
Resolution (spectral pictures)
Pixel pitch
Maximum frame rate
Exposure time range
ADC
Camera control
Digital output
Power supply
Dimension (W x H x L)
Weight (camera head)
USB 3.0
10-bit USB 3.0
USB 3.0
52 x 63 x 40 mm
180 g
CMOS
CS-mount (C-mount compatible with additional C-ring)
2048 (H) x 2048 (V)
512 (H) x 512 (V)
5.5 μm
65 Hz (camera acquisition) / 20 Hz (COLOR SHADES Lab)
100 µs to 5 s
10-bit
Spectral Specifications
Typical Spectral Range
Number of bands
Bandwidth (FWHM avg)
420 to 870 nm
10
30-50 nm
Applications
Software Development Kit (SDK)
COLOR SHADES® LAB is the SDK for the SILIOS multispectral cameras (CMS, CMS4 and TOUCAN). It allows :
1) displaying the raw images, false color images, gray scale images or overlaid images with different indexation methods (such as "spectrum recognition"),
2) normalizing the spectral channels,
3) applying multispectral image corrections such as the crosstalk correction,
4) extracting the hypercubes.
COLOR SHADES® LAB runs with real time acquisition, but can also run with recorded single image or series of images (“replay mode”).
COLOR SHADES® LAB supports any of the SILIOS cameras and recognizes each plugged one via its S/N number. The specific spectral data of the corresponding multispectral sensor are then used for spectral corrections and treatments.
COLOR SHADES® LAB is supplied for free with any purchased multispectral CMS/CMS4 camera.
COLOR SHADES ® LAB
Videos
COLOR SHADES Lab Tutorial
Part 1/4
How to connect the camera,
to tune it,
to get raw images.
COLOR SHADES Lab Tutorial
Part 2/4
How to apply a white reference,
to correct the cross-talk,
to optimize the color rendering.
COLOR SHADES Lab Tutorial
Part 3/4
How to process the multispectral data using a spectrum recognition algorithm.
COLOR SHADES Lab Tutorial
Part 4/4
How to use the Replay Mode,
How to apply the Flat Field correction.